Specifications

12 LaserLight Remote Display Installation & Operation Manual
Table 3-1 summarizes the functions of each of the main menus and Figure 3-4 illustrates the main menu
selections.
Figure 3-4. LaserLight Main Menu Options
When configuring the indicator attached to the remote display, ensure that the decimal point configuration is
compatible with the remote display. The
LaserLight 7-segment remote display allows none, one, or two decimal
places (see Figure 3-2 for jumper positions). The 8- or 12-character matri
x displays use one character position for
the decimal point.
Figure 3-5 shows the configuration menu.
Figure 3-5. Configuration Main Menu Choices
Note: With the 8- and 12-character matrix displays some of the labels are not shortened, for example STDSTL in the
7-segment is STAND STILL on the 12-character display.
7-segment
Display Menu
8-Character
Matrix Display
Menu
12-Character
Matrix Display
Menu
Menu Function
CONFIG CONFIG CONFIG Configuration. Configures time and date (opti
on), temperature (option),
display brightness, mirroring, and other parameters associated with
configuring the remote display
SERIAL SERIAL SERIAL Serial. Configures serial ports
TEST TEST TEST Test. System hardware tests
VER VERSION VERSION Version. Displays installed softwar
e version number
Table 3-1. LaserLight Remote Display Menu Summary
TEST
SERIAL
CONFIG
VER
TIM DAT
TEMP
BRIGHT
ENABLE
Off
On
ISO
USA
Minutes
Hour
FORMAT
SET
DA TE
Month
Day
Year
SUPP 0
MIRROR
STDSTL
ADDRES
MSG TM
D TEST RESET
On
Off
C
F
DAY
On
Off
Off
On
Off
On
0 - 31
Of f
On
CONFIG
SERIAL
TEST
VER
15 sec
5 sec
30 sec
1 min
5 min
Reset
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
LEARN EN
Off
On
NIGHT
TEMP ADJ
+/- 5