Installation manual

Introduction 1
About This Manual
This manual contains operating procedures for the
IQ9500 counting scale and provides the user with all
the information necessary for set up and operation.
This manual is organized based on the procedures you
will likely follow when setting up and using your
counting scale.
Some procedures described in this
manual require work inside the scale
base. These procedures are to be
performed by qualified service
personnel only.
Authorized distributors and their employees
can view or download this manual from the
Rice Lake Weighing Systems distributor
site at
www.rlws.com
.
1.0 Introduction
The IQ9500 counting scale (Figure 1-1) offers
practical solutions for a full range of precision
counting applications. Models with an internally
mounted load cell are available in capacities of 0.5 to
100 pounds. Models with external platforms are
available in capacities of 5.0 to 50,000 pounds.
Features include 200 item code storage, over/under
weight and quantity checking capability based on
programmable setpoints, and an optional battery
power for standalone applications.
1.1 Unpacking and Inspection
Immediately after unpacking, visually inspect the
IQ9500 to ensure all components are included and
undamaged. If any were damaged in shipment, notify
Rice Lake Weighing Systems and the shipper
immediately.
Ensure all accessories are removed from the cartons,
then replace all packing materials in the cartons and
store in a safe place. Use the original cartons
whenever shipment of the scale is required.
1.2 Repacking
If the IQ9500 counting scale must be returned for
modification, calibration, or repair, it must be properly
packed with sufficient cushioning materials and the
load cell must be installed to prevent damage to the
load cell (see Section 2.1).
Whenever possible, use the original carton when
shipping the IQ9500. Damage caused by improper
packaging is not be covered by warranty.
Figure 1-1. IQ9500 Counting Scale with Optional Pole
Mount Assembly
Warning