Installation manual
RS-232 Specification 33
Figure 8-1 shows an example of the Eltron printer
format without recalling an item code number from
memory. Shown in Figure 8-2 is a label sample
recalling an item code number from memory and the
scale configured for unit weight equal to A.P.W.
Figure 8-3 is a label sample recalling an item code
number from memory and with a scale configured for
unit weight equal to wt/1000 pieces.
Figure 8-1. Sample Label without Recalling an Item Code
from Memory (not to scale)
Figure 8-2. Sample Label with Recalling an Item Code
from Memory and the Scale Configured for Unit Weight
Equal to A.P.W (not to scale)
Figure 8-3. Sample Label with Recalling an Item Code
from Memory and the Scale Configured for Unit Weight
Equal to Wt/1000 Pieces (not to scale)
8.3 Epson Tape Printers
The Epson TM-U200 tape printer default settings
(with and without cutter) are 9600 baud rate, eight-bit
data length, no parity and one stop bit and connnected
to either the 9-pin D-sub connector or the 8-pin DIN
connector.
NOTE: Epson printers must be connected to the
IQ9500 and powered on before powering up the
IQ9500.
Table 8-4 through Table 8-7 shows the various
TM-U200 printer configuration settings using
Specifications 3, 10, 11, and 13. A sample of the
printer printout is shown in Figure 8-4.
Specification Bit 3 Bit 2 Bit 1 Bit 0
SPEC 3 0011
SPEC 10 1111
SPEC 11 0100
SPEC 13 0000
Table 8-4. Epson TM-U200 Printer Specification (Without
Cutter) Connected to 9-Pin D-Sub Connector
Specification Bit 3 Bit 2 Bit 1 Bit 0
SPEC 3 0010
SPEC 10 1111
SPEC 11 0100
SPEC 13 0000
Table 8-5. Epson TM-U200 Printer Specification (With
Cutter) Connected to 9-Pin D-Sub Connector
Specification Bit 3 Bit 2 Bit 1 Bit 0
SPEC 3 0011
SPEC 10 1111
SPEC 11 0100
SPEC 13 0001
Table 8-6. Epson TM-U200 Printer Specification (Without
Cutter) Connected to 8-Pin DIN Connector
Specification Bit 3 Bit 2 Bit 1 Bit 0
SPEC 3 0010
SPEC 10 1111
SPEC 11 0100
SPEC 13 0001
Table 8-7. Epson TM-U200 Printer Specification (With
Cutter) Connected to 8-Pin DIN Connector