Installation manual

Configuration/Dealer Settings 19
2 1000 Scale Specification
00: Gram (for weighing only) 01:Kg
10: Lb 11:Not used
Kg/lb Lamp On
0: Yes
1: No
Inventory Display by
Gross Key
0: No
1: Yes
3 0001 RS-232 Port Commands
00: Standard RS-232 (PC)
01: TM-U295 (without form feed)
10: TM-U200 (with cutter)
11: TM-U200 (with feed and tear off)/
TM-U295 (with form feed)
Print Commands
00: Eltron (barcode printer)
01: TM-U295 (without form feed)
10: TM-U200 (with cutter)
11: TM-U200 (with feed and tear off)/
TM-U295 (with form feed)
4 0001 Set New Item
Code During
Normal Mode
0: Yes
1: No
Extent of Insufficient Samples
00: 0.1%
01: 0.2%
10: 0.0%
Negative Counting
0: No
1: Yes
5 1011 Sampling Time for
Unit Weight
Calculations
0: 10 times
1: 5 times
Insufficient Sample
Indicator/Pieces
Key
0: Press PIECES
key after adding
number of pieces
1: Automatically
recomputes after
adding number of
pieces
Date Order
00: Year, Month, Day
01: Day, Month, Year
11: Month, Day, Year
6 1101 Display Accuracy
of Unit Weight
0: No
1: Yes
Clear All Input Key
in One Touch
0: Yes
1: No
RS-232 Continue
Sending Rate to PC
0: High
1: Low
Auto Shift to Next
Position After Two
Key of Teraoka Code
Entries
0: No
1: Yes
7 0010 Setpoint Buzzer
0: Yes
1: No
Setpoints
0: Latch
1: No latch
Setpoint Type
00: % Quantity 01: % Weight
10: Quantity 11: Weight
8 0111 RS-232C
Connection (force
balance)
0: No
1: Yes
RS-232C (force
balance) Data
Length
0: 7 Bits
1: 8 Bits
RS-232C (force balance) Baud Rate
00: 1200 01: 2400
10: 4800 11: 9600
9 0100 RS-232C (force
balance) Stop Bit
0: 1 bit
1: 2 bits
Force Balance Type
0: Not used
1: Ohaus 2130
RS-232C (force balance) Parity Bit
00: No 01: Odd
10: Not used 11: Even
Specification Default Bit 3 Bit 2 Bit 1 Bit 0
Table 5-1. Applicable IQ9500 Customer Specifications (141 Settings) (Continued)