Specifications

16 QB Series Operation Manual
61.0.C
0 Output control
(available only when
interface option is
set to ON)
Output prohibited (stop)
1 Continuous output
NOTE: When the RS-232C interface is installed, output interval of data in
constant transmission is 0.1 – 1 second, depending on the weighing condition
and response parameters of 5.rE.X above.
2 Continuous output when data is stable. No output when data is unstable.
NOTE: When RS-232C interface installed, output interval of data in constant
transmission is 0.1 – 1 second, depending on the weighing condition and
response parameters of 5.rE.X above.
3 Data output x 1 each time P key is pressed and released in weighing mode
4 Automatic output x 1 after data stablized
NOTE: Only one transmission is sent after a stabilization from an increasing load.
No additional output will be generated until the device returns to a 0.00 value and
resets for the next load.
5 Automatic output x 1 of stable data; output prohibited if data unstable
6 Automatic output x 1 of stable data; continuous output of unstable data
7 Data output x 1 each time P key is pressed and released with data stablized
62.6L
1 Baud rate (available
only when interface
option is set to ON)
1200 bps
2 2400 bps
3 4800 bps
63.PA
0 Parity bit selection
(avalable only when
interface option is
set to ON)
None Available only when option 6.IF.2 is selected
(parity bit available only in 7-digit format)
1 Odd
2 Even
7.UN
1 Unit of measure gram
2 kilogram
3 carat
4 decimal ounce
5 pound
6troy ounce
7 pennyweight
8 grain
9 Hong Kong tael
A Singapore tael
bTaiwanese tael
C momme
Display Setting Function Description
Table 4-1. Function List (Continued)