User Manual

86 M-Class
Level One Reset
To retu rn t he p rinter to the factory defa ult set ti ngs or, if saved, to restore the F act ory S etting File:
 Tu rn ‘Off’ the pr inter.
 Press and hold the PAUSE and CANCEL Keys while turning ‘On’ the printer; continue to depress the keys until the
‘READY’ message a ppears.
 Note: This reset has the same effect as the System Settings / Set Factory Defaults selection in the menu system. (See
Section 5.1 for a listing of the f act or y default settings and Section 5.1.5 for information about the Factor y Set t ing File.)
Level Two Reset
To return the printer to the factory default settings, and clear all the calibration and adjustment parameters:
 Tu rn ‘Off’ the pr inter.
 Press and hold the PAUSE, FEED, and CANCEL Keys while turning ‘On’ the printer; continue to depress the keys
until the ‘READY’ message appears.
 Note: After executing a Level 2 Reset, the media calibration must be performed; see Section 5.4. A listing of the factory
default settings can be found in Section 5.1.