User Manual

M-Class 63
5.3 Quick Test Mode
This section ex pl ains the f u nctions of the res ident Q uic k Tests, a c c essible b y press i ng the
Key on t he Front Panel.
 Notes: (1) With the exception of the Configuration Label, all Quick Test labels require 4-inch (102mm)
wide media to print the entire format. If using narrower media, change the Label Width setting
(Section 5.1.2) to match your media’s width to avoid printing on the platen.
(2) During any Quick Test, press the Key or the Key to stop prin ting.
(3) Using the ‘Print Test Rate’ feature (Section 5.1.7), a time delay can be set for printing labels
in Quick Test Mode.