User Manual
M-Class 55
System Settings (continued)
FAULT HANDLI NG♦
When a fault condition (ribbon out, media out, etc.) is detected, this setting
determines the level of intervention and the disposition of the label being pr inted at
the time the fault occurred.
LEVEL
Selects the printer’s action, the action required by the operator, and the label’s
reprint status.
STANDARD
Printing stops and a fault message is displayed. After the problem is corrected, the
FEED Key must be pr essed to clea r the fa ult. T he label in process is reprinted.
VOID AND RETRY
Dep ending u pon the RE TRY COUN T, one of the f ollowing act i ons when fau lted:
• If the R et ry C ount set ting has not been exceeded, ‘ VO I D ’ is print ed on t he label in
proces s and r ep rint ing oc c urs automatic ally;
• If the Retry Count has been exceeded, printing stops and a fault message is
disp la yed. Af t er t he prob lem is cor r ec ted, t he FE ED Key mus t be press ed to c lea r
t he fault. The la bel in p rocess is reprinted; or,
• If the CANCEL Key is pressed the operator now has the option of canceling the
reprint:
To allow the reprint, press the ESCAPE Key or to cancel the reprint, press the
ENTER Key (the operator now has the option of canceling the entire label batch
by pressi ng the E N TE R Key again.)
Note: VOID will not be printed when insufficient space exists for the height of the text (see VOID
DISTANCE, below) or if the fault occurred after the entire label was completed (i.e., when the label
reaches its Present Distance at or above the TOF).
NO REPRINT
Printing stops and a fault message is displayed. After the problem is corrected, the
FEED Key must be pressed to clear the fault. The label in process is not reprinted.
VOID DISTANCE
0.50 i n (. 10-2. 00)
Sets the distance to backup the faulted label to print ‘VOID’ on its trailing edge,
which al so indirectly es ta b lishes the font siz e of the void mes sage.
RETRY COUNT
1 (0-3)
Es t a blis hes the number of t imes the pr int er will at t empt t o r epr int a la bel. If t he la st
label printed in this count has been voided, the printer will stop and display a fault
message.