User Manual

M-Class 53
System Settings (continued)
DPL E M ULAT IO N ♦
(not available with M-4306)
Determines SOP Emulation (start of print (<STX>O)) see above, Column
Emul ation ( see ab ove) , positi ons b arc odes as does selected p rinter.
STANDARD
Star t of print 220; th e b el o w excepti o n s a r e dis a bled.
ALLEGRO
PRODIGY PLUS
PRODIGY
Allegro, Prodigy P lus, and Prodigy em ulat ions enabled:
• Data Terminator – I 2 of 5 Barcodes (IDs D, J, and L), the first non-numeric char acter
processed will terminate the barcode data field.
• Bar Size – I 2 of 5 Barcode (ID L), when the bar size is specified gr eater than P (25),
the size is automatically decreased to 10.
• Human Readable Fonts – The EAN and UPC bar codes (IDs B, C, F, G, M, and N) print
a fixed font siz e.
• Lines and boxes: Rotations 2 and 4 are affected by the vertical multi-plication factor
defi ned in t he DPL Dxx comm a nd.
• Column positions greater than the printhead width are adjusted back to the printable
ar ea and pri nted.
• Barcodes (rotation 3, upside down / right to left) with row position less than barcode
height result in row position equal to barcode height, that is, barcodes falling off label
leading edge are pushed back onto the label.
• <STX>L (Label Command) followed by no printable fields result in no paper
movement. (When disabled a blank label is printed).
Allegro Only:
• Th e row position is calculated based on 194 DPI.
COL UM N E M ULAT IO N ♦
* Not availabl e in M- 4306
Compensation for location of column position 0 via columnar dots per inch (dpi)
em ulation
203 in ( 180 - 250)
Dpi emulation, sma ller numbers shrink tex t from right to lef t.