User Manual

32 M-Class
4. 7 Cal ibra t ion Mode – Button Func t ions
In ‘ Calibra tion’ mode, the buttons allow the p rinter to adjust to the media b eing u sed. Calibra tion can be p erf ormed either
a utoma ti c ally or ma nually, as detailed b elow.
 Notes: Before cali br at i ng, ensure that t he Print head Carrier Assembl y i s l at c hed down, that t he cover i s closed, and that t he
m edia sensor has been set for the appropriate media ty pe, see Section 4. 5. 2.
Print er and cut t er faul ts ar e disabled duri ng
and
, but can still occur while
pri nt ing “test” l abels.
If at any t i me you wish t o di scar d your changes and rever t back t o t he previous cali br at i on simply t ur n of f power to the
pri nt er. Al so, Fact or y Default s can be restored, see Section 6.7
To p erform C alibra tion:
Auto Media Calibration
(See section 4.7.1)
(Until Paus ed light t urns off)
(See section 4.7.2)
Calibration Mode
Analyze for ‘Paper’
Analyze for ‘Backing or ‘Mark’
Analyze ‘Out of Media’ condition
Prints the ‘Test Label’ for “test”
Media Sensor Calibration
(Press and hold during power-up until the light turns off)
STOP
CANCEL
PAU SE
Feeds one label for “test”
Press and
Release
(
)
FEED
FEED
Press and
Hold
(
)
CANCEL
Saves the current values
and resumes
Normal Mode
+
PAU SE
CANCEL
PAU SE
FEED
CANCEL
Accepts the current
values for “test”
+
PAU SE
CANCEL
DONE