User Manual

M-Class 25
21) IN P UT MODE
Selects between th e standar d or template
interpretation of in coming data.
Possible Values:
* DPL (printer con structs the label using th e
sta ndard DPL comm and s)
LINE (printer constructs the label using a
preloaded template form)
22) DPL EMULAT IO N
This instructs the firmware to process specific DPL data (Start of
Print, DPI, and Imaging function ) according to the selected
printer emulation .
Possible Values:
* STANDARD
ALLEGRO (Allegro Emulation)
P PLUS (Prodigy Plus Emul at i on)
PRODIGY (Pr odigy Em ul at i on)
23) HEAT
Con trols the ‘burn -time’ of the printh ead. This is
the equivalent of Heat Settin g on most label
software programs.
Possible Values:
Range: 0 – 30; default = *10
24) EXACT TIME
Instructs the prin ter to wait until the system is idle before the next
label’s data and time fields are formatted to eliminate any
discrepancy between the buffered and prin ted times.
Possible Values:
YES or NO; d efault = * NO
25) GPIO
Sets the printer’s option port to function for GPIO
applications, (see Appendix F for more
infor mation).
Possible Values:
YES or NO; d efault = * NO
26) NO REPRINT
When a fault condtions is detected, prin tin g stops and the ERROR
light turns on. After the problem is corr ected, the FEED Key must
be pressed to clear th e fault. Th e label in process is not r epri nt ed.
Possible Values:
YES or NO; d efault = * NO
(NO = NO REPRINT” disabled, reprinting will occur.)
 Not e: All of t he m enu it ems li st ed in t he previous secti on ar e stored in non-vol at il e m em or y.