User Manual

M-Class 23
4.5.2 Menu Items and Values
The t able b elow det ails the Printer Setu p Menu List items with a brief descrip tion of the item’s f unc ti on, a nd the p ossible
valu es. A “ *” denot es the defaul t setting.
1) MEDIA TYPE
Sets prin tin g for dir ect thermal (no
ribbon) or t hermal t ra ns fer ( ribbon)
media.
Possible Values:
* DIRECT THERMAL
THERMAL TRANSFER
2) SENSOR TYPE
Sel ects the sens or type us ed to detect
the media’s Top Of Form (TOF) mark.
Possible Values:
* EDGE: gap / notch TOF marks
REFL (Reflective): black marks
CONT (Contin uous): no TOF marks
3) PRESENT SENSOR
Enables/Disables the optional Present
Sensor feature.
Possible Values:
* AUTO
NO
YES
4) CUTTER EQUIPPED
Enables/Disables the optional
Media Cutter feature.
Possible Values:
* AUTO
NO
YES
5) SOP ADJUST
Sets the start of print (SOP) location ,
relative to th e top of form.
Possible Values:
Range: 0 – 255; n omin a l = *128
(0 = close to edge; 255 = farthest from edge)
6) PRESENT ADJUST
Specifies an additional amount to feed
the label after printin g.
Possible Values:
Range: 0 – 255; n omin a l = *128
(0 = close to edge; 255 = farthest from edge)
7) BAUD RATE
Sets the serial por t baud rate. (Must
match the host setting).
Possible Values:
600 to 38.4k; default = *9600 BPS
8) DAT A BITS
Sets the serial data word length (Must
match the host setting).
Possible Values:
* 8
7
9) CONTROL CO DE S
Allows code selection listed in
Programmer’s manual.
Possible Values:
* (STD) Standa rd Codes
(ALT) Alternate Codes
10) CONT FORM LENGTH
Set s t he pag e (l abel) size when the
‘SENSOR TYPE’ is set to
cont inuous media.
Possible Values:
Range: 0 – 9999; default = *100
(Un its = .01 inch)
11) OOS MAXVOLT
Sets the media sen sor level for th e Out
Of Stock condition.
Possible Values:
Range: 0 – 16; n omin a l = *2
(Unit s = .1 volt)
12) TOF GAIN
Sets media sensor Top of Form gai n
value.
Possible Values:
Range: 0 – 15; nominal = *10