User Manual

118 M-Class
8. Use the
FWD
and
RE V
buttons to increment/decremnt the
flashing value. Press the
button to move to the next
f i el d . O n ce all field s are c o rrect p ress the
button onc e.
The valu e will a utoma tic ally be s aved.
Yo u can th en use the
FWD
to scroll to the ‘SUBNET MASK
and ‘GATEWAY’ menu items and set those values in the s ame
manner as the
‘IP ADDRESS’ was set.
JQ!BEESFTT!
+2:3/111/111/2:3!
TVCOFU!NBTL!
+111/111/111/111!
HBUFXBZ!
+111/111/111/111!
 Note: W hen the menu item ‘IP DISCOVERY’ is set to enabled you will not be able t o change the values for the “IP
ADDRESS’, ‘SUBNET MASK’, or ‘GATEWAY’ menu items. The values displayed are for reference only and
will bec ome active once ‘IP DISCOVE RY ’ s et t o dis abled.
9. Once you have the p roper a ddresses set, press the
button
repeatily until you have exited t he p rinter’s menu. Tu rn OFF the
printer a nd then back ON.
XFE!21;27B!13KVM3114!
SFBEZ!
Onc e you have ent ered you r IP set tings into the printer you c an t hen ins tall the p ort and printer dr iver using the W indows
®
‘Add a P rinter Wizard’. See section, Installing the Printer Driver and Port in this doc u ment.