User Manual

M-Class 93
Printer Fault Messages (continued)
Displayed Message Description Possible Solution(s)
!
!
PVU!PG!TUPDL!
!
The p rint er c an not det ect
media.
Try the f ollowing:
1) Load media.
2) Ensure that the labels are passing through the Media Sensor.
3) Readjust the Media Sensor over the TOF mark; see Section
3.3.
4) If using media with large gaps, adjust the Paper Out
Distance; see Section 5.1.2.
5) Calibrate the printer; see Section 5.4.
!
!
QPTJUJPO!GBVMU!
Two possible causes:
(1) T he printer was powered-
off or res et during a rib bon,
out of s tock or TOF fault; or
(2) the printer was una ble to
complete the Media
Calibration.
Dep ending u pon the cause:
(1) Press the FEED Key in an attempt to identify and then
clear the related fault c onditi on; or (2 ) if neces sar y, calibra te
the printer; see Section 5.4.
!
!
QSJOU!FOHJOF!GBVMU!
The p rint er has det ec ted a
problem within t he p rint
logic.
T ry cycling t he printer p ower ‘Off’ and ‘On’. If t he fa ult
does not cl ear, call for servic e.
!
!
SBN!GBVMU!
The system has detected a
R AM f ailure.
T ry cycling t he printer p ower ‘Off’ and ‘On’. If t he fa ult
does not cl ear, call for servic e.
!
SFGMFDUJWF!NPEF!
DBOOPU!DBMJCSBUF!
!
C onsistently low sens or
readings were detected.
P ress any key to c ontinue. Ensure that the ref lec tive ma rk
was inserted f acedown in t he media sens or du ring t he
app ropri ate calibrati o n step; al so, en su re th at the ref l ective
mark is ma de of c ar bon based ink, and that the sensor is free
of debris . Retry c alibra tion. If the problem pers ists, tr y an
‘Advanc ed E ntry C alibra tion’; see S ection 5.4.3.
!
SFGMFDUJWF!NPEF!
GBVMUZ!TFOTPS!
!
C onsistently high sens or
readings were detected.
P ress any key to c ontinue.
Ensure that media was removed from t he media sens or
during t he appropriate calibra tion step s; a lso ens ure that no
la bels ar e s tuc k in the media s ens or. Retry the calibra tion. If
t he problem p er sists, c all for service.