Manual

Configuration Using Web-Manager
MatchPort b/g™ User Guide 20
Figure 4-3. Network Settings (Wireless Only)
Network Mode Configuration
To determine the MatchPort’s network mode:
1. Click Network from the main menu.
2. Modify the following:
Network Mode Select Wireless Only to enable only the wireless network
connectivity for the MatchPort. Select Wired Only to enable
only the Ethernet network connectivity. Select Bridging
(Single Host) to enable Ethernet –to-wireless bridging on the
MatchPort. (For more information on bridging, see 9: Wireless
Bridging.)
Automatic IP Address Configuration
To assign an IP address and its network configuration automatically:
1. Click Network from the main menu.
2. Select Obtain IP address automatically.
3. Enter the following (as necessary):
BOOTP Select Enable to permit the Bootstrap Protocol (BOOTP). The
BOOTP server automatically assigns the IP address from a
pool of addresses.