Manual

MatchPort b/g™ User Guide 10
1
1
:
:
U
U
s
s
i
i
n
n
g
g
T
T
h
h
i
i
s
s
G
G
u
u
i
i
d
d
e
e
Purpose and Audience
This guide provides the information needed to configure, use and update the
MatchPort b/g
TM
and is intended for software developers and system integrators who
are embedding the unit in their designs.
Chapter Summary
The remaining chapters in this guide include:
2: Introduction Describes the main features of the MatchPort and the protocols it
supports.
3: Using DeviceInstaller Provides information for viewing the MatchPort’s configuration
using DeviceInstaller.
4: Configuration Using Web-
Manager
Details configuration using the Web-Manager to set parameters
such as port and server properties.
5:
Configuration via Serial Mode
or Telnet Port
Provides instructions for accessing Setup Mode (command line
interface) using a Telnet connection through the network or a
terminal or terminal emulation program through the serial port
serial port 1). Details the parameters that you must configure.
6: Configurable Pins Provides instructions for configuring the eight General Purpose I/O
pins.
7: Monitor Mode Provides instructions for accessing and using the command line
interface for monitoring the network and diagnosing problems.
8: Updating Firmware Provides instructions for obtaining the latest firmware and updating
the MatchPort.
9: Wireless Bridging Provides information on the MatchPort wireless-to-Ethernet
bridging feature.
10: Troubleshooting Describes common problems and error messages and provides
information about the diagnostic LEDs. Also provides Lantronix
Technical Support contact information.