User guide

Ethernet TCP/IP Card Installation Manual - WLAN Installation and Configuration 17
Authentication choices are:
•0 = open/none
• 1 = Shared
Select
0 = open/none and press Enter.
13. Select the correct encryption next. Choices are WEP64 and WEP128 as shown below. Select
1 = WEP64
as the default parameter and press
Enter.
Figure 4-15. Encryption Screen
14. Next, it asks to display current key? Press N and press Enter.
Figure 4-16. Display Current Screen
15. Select Yes (Y) for the “display current key” option. This prompt shows the currently configured key/
passphrase.
Figure 4-17. Change Key Screen
16. Select the data rate and press Enter.