User guide

16 Ethernet TCP/IP Card Installation Manual
Select 0 for your choice and press Enter.
10. The next menu choice is Network Name as shown below.
Figure 4-12. Network Name Screen
Enter your wireless network name as your menu choice and press Enter. This identifies the network that the
wireless option will run on.
11. The next step is to select a level of security as shown in Figure 15.
Figure 4-13. Security Level Select Screen
Security levels include:
• 0 = None
• 1 = WEP (Equivalency Protection)
•2 = WPA
Select
1 and press Enter.
12. The next step is to set the authentication level for the configuration as shown below.
Figure 4-14. Authentication Screen