User Manual - Version 2.0

Counterpart User Manual - Serial Commands 65
SC.WLIN.V1
SC.WLIN.V5#n
Test weight value for linearization points
1–5
0.000001–9999999
SC.WLIN.C1–
SC.WLIN.C5#n
Calibrate linearization points 1–5 —
SC.LC.CD#n Deadload coefficient —
SC.LC.CW#n Span coefficient —
SC.LC.CZ#n Temporary zero —
SC.REZERO#n Rezero —
SC.SEC#n Secondary units lb, kg, g, oz, OFF
SC.TER#n Tertiary units lb, kg, g, oz, OFF
KEYLCK.NUMBER Keys can be locked or unlocked.
Default for all: Unlock
LOCK
UNLOCK
KEYLCK.PRINT
KEYLCK.TARE
KEYLCK.ZERO
KEYLCK.SAMPLE
KEYLCK.GROSSNET
KEYLCK.UNITWT
ETH.DEFAULTGATEWAY Sets IP address 0.0.0.0
ETH.DHCP DHCP ON, OFF
ETH.DNSPRIMARY DNS Primary 0.0.0.0
ETH.DNSSECONDARY DNS Secondary 0.0.0.0
ETH.IPADDRESS IP Address 192.168.0.1
ETH.LOCALHOSTNAME Local Host Name COUNTERPART
ETH.MACADDRESS Mac Address 00-00-00-00-00-00
ETH.NETMASK Netmask 0.0.0.0
ETH.PORT Port 10001
ETH.REMOTESERVERIP Remote server IP 0.0.0.0
ETH.REMOTESERVERPORT Remote server port 5466
ETH.WEIGHVAULT WeighVault OFF, ONBOARD, EXTERNAL
ETH.ECHO Echo EDP commands ON, OFF
Command Description Values
Table 6-4. SCALES Serial Commands (Continued)
Command Description Values
EDP.BAUD#p Port baud rate 1200, 2400, 4800, 9600, 19200, 28800, 38400, 57600, 115200
EDP.BITS#p Port data bits/parity 8NONE, 7EVEN, 7ODD
EDP.STOPBITS#p Port stop bits 1, 2
EDP.PRNMSG#p Print message ON, OFF
EDP.ECHO#p Port echo ON, OFF
EDP.EOLDLY#p Port end-of-line delay 0–255 (0.1-second intervals)
EDP.HEADERS#p Port header ON, OFF
EDP.INPUT#p Port input CMD, SCANNER, SCALE, IND SC
Table 6-5. SERIAL Port Serial Commands