User Manual - Version 1.0 Owner's manual

Counterpart User Manual - Print Formatting 59

Command Description

Supported Ticket

Formats

<G> Gross weight in displayed units

GFMT, NFMT,

TOTALFMT, PALFMT,

CFMT, ACCFMT

HDRFMT1, HDRFMT2

<N> Net weight in displayed units

<T> Tare weight in displayed units. Add four before bracket to print header

<A> Accumulated weight in displayed units

<AC> Number of accumulator events (5-digit counter)

<AD> Date of last accumulator event

<AT> Time of last accumulator event

<UID> Unit ID number

<CN> Consecutive number

<C> Piece count, current scale

<C#n> Piece count, scale n

<NLnn> New line (nn = number of termination (<CR/LF> or <CR>) characters)*

<SPnn> Space (nn = number of spaces)*

<SU> Suppress Units. Toggle weight data format (formatted/unformatted)**

<TI> Time

<DA> Date

<TD> Time & Date

<H1> Header 1

<H2> Header 2

<IDC> Loaded ID Code - 32 characters maximum

<IDD> Loaded ID Description - 32 characters maximum

<IDLC> Loaded ID Location - 12 characters maximum

<IDP> Loaded ID Part Number - 32 characters maximum

<IDLT> Loaded ID Lot - 32 characters maximum

<IDU> Loaded ID Units - 1 character maximum

<IDT> Loaded ID Tare - 9 characters maximum (range 0.0 to 9999999.0)

<IDW> Loaded ID Unit Weight - 9 characters maximum (range 0.0 to 9999999.0)

<IDQ> Loaded ID Quantity - 11 characters maximum (range -2000000000 to 2000000000)

<C> Piece Count, current scale - 7 characters maximum (no explicit maximum value)

<C#n> Piece Count, Scale n

<TTLV> Totalization Value - 11 character maximum (range -2000000000 to 2000000000)

<TTLC> Totalization Count - 4 characters maximum

<TT> Transaction Type - gives a “1” for receiving (in) or “0” for (sending out)

Note: This command cannot be used in any other format except Weighvault

Table 7-1. Print Format Commands