User Manual - Version 1.0 Owner's manual

56 Counterpart User Manual
REG.BASE Zero base for overload calculation CALIB, SCALE
REG.PRTMOT Allow print while in motion NO, YES
REG.PRINTPT Add PT to keyed tare print NO, YES
REG.SNPSHOT Display or Scale weight source DISPLAY, SCALE
SD Set date MMDDYY, DDMMYY, YYMMDD, or YYDDMM. Enter six-digit
date using the year-month-day order specified for the
DATEFMT parameter, using only the last two digits of the year.
ST Set time hhmm (enter using 24-hour format)
TIMEFMT Time format 12HOUR, 24HOUR
TIMESEP Time separator COLON, COMMA
Command Description Values
GFMT.FMT Gross demand print format string See Section 7.0 on page 58 for information about demand print
format strings.
NFMT.FMT Net demand print format string
ACC.FMT Accumulator print format string
CFMT.FMT Count format
TOTAL.FMT To tal F orma t
HDRFMT1 Header 1 Format
PALFMT.FMT Pallet Format
HDRFMT2 Header 2 Format
Table 6-9. PFORMT Serial Commands
Command Description Values
DIO#b Digital input function OFF, ZERO, NT/GRS, TARE, UNITS, PRINT,
ACCUM, TIMDATE, ESC, CLEAR, DSPTAR,
IDKEY, KEY0–KEY9, KEYDP, ENTER, NAVUP,
NAVDN, NAVLFT, NAVRGT, KBDLOC, HOLD,
CLRCN, GROSS, NET, PRIM, SEC, CLRTAR,
CLRACC, TRIGGER
DIO#b Digital output function OVER, UNDER, ACCEPT, ZEROBD
Digital inputs and outputs are specified by bit number
Table 6-10. DIG I/O Serial Commands
Command Description Value
GFMT.PORT Set the port for each of these commands 2
NFMT.PORT
ACC.PORT
CFMT.PORT
TOTAL.PORT
PALFMT.PORT
Table 6-11. Select Port Serial Commands
Command Description Values
Table 6-8. FEATURE Serial Commands (Continued)