User Manual - Version 1.0 Owner's manual

26 Counterpart User Manual
RECALL ON
OFF
ON allows the Tare, Zero, and Units values to be maintained across a power cycle. Over/
Under/Target/ID values are also maintained.
OFF clears the values on a power cycle. Zero is reset to calibrated zero and Units are reset to
Primary. Over/Under/Target/ID values are reset as well.



DISPLAY CONTRAST
BRIGHT
IMAGE
Adjusts Counterpart display viewing. Key in a value
BRIGHT - Key in a value
IMAGE - enter negative or positive
KEYBEEP OFF
ON
Select ON to alert the user every time a key is pressed.
Level 4 submenus - under the Level 3 Count Feature
NEGCOUNT ON
OFF
Sets whether negative weighing mode is off or on.
SAMPLQTY 10
25
50
100
Is the default value for sample quantity.
INSFSMPLE 0.1
0.2
0.0
A minimum sample size is required based on the platform capacity and product weight.
LOTUPDT OFF
ON
Updates the lot number from the front panel softkey.1 It does not override the stored value.
SCLCHG REZERO
CHKSTABLE
XFRTARE
XFRUTWT
Scale change. These are actions taken when changing from one scale to another.
NEWITEM OFF
ON
New item. This prompts to add an ID to memory from the front panel.
DISPACC OFF
ON
Display accuracy
UTWTUPDT OFF
ON
Enables or disables the updating of the loaded ID with a new unit weight value.
OFF - Parts can be sampled (generating a new unit weight) or a unit weight can be keyed or
scanned but the new unit weight is not saved into the stored copy of the currently loaded ID
record.
ON - If on, the unit weight will update the stored value whether at zero or actual value.
UTWTBASE 1000
1
Unit weight base. 1=APW (Average Piece Weight), 1000=Piece weight per thousand.
FEATUR Menu
Parameter Choices Description
Table 3-7. FEATUR Submenu Parameters (Continued)