User Manual - Version 1.0 Owner's manual

18 Counterpart User Manual
3.5 Menu Structures and Parameter Descriptions
The Counterpart scale can be configured using a series of menus accessed through the scale front panel when the
scale is in setup mode.
Figure 3-5 and Table 3-3 summarizes the functions of each of the top level menus.
Figure 3-5. Top Level Configuration Menu
The Counterpart counting scale can be configured using a series of menus accessed through the display front
panel when the scale is in setup mode. The top level menu structure includes the following:
.
3.6 Setup Menu
The setup menu allows you to configure settings for the scale, features, serial port settings, Ethernet, print
format, and digital inputs and outputs. You can also view the software and regulatory versions, and revert to
default settings.
3.6.1 SCALE Submenu
Calibration can be performed in two places within the menu: the CALIBR menu shown in Figure 3-11 is an
in-depth scale setup and calibration. A “quick access” calibration is shown in Figure 4-1 on page 39.
Menu Menu Function
ID ID Sets up IDs of various parts
AUDIT Audit Trail View audit trail data
CALIBR Calibration Calibrate Counterpart through this menu
SETUP Setup Set up the configuration parameters
TEST Tes t Me nu Test functionality
DISPLAY Display Sets up the display parameters of Counterpart
Table 3-3. Top Level Menu Structure
To access the second level parameters use the down arrow on the indicator to access the submenus which are
noted in
Table 3-4.
Menu Menu Function
SCALES Configuration Configure and calibrate scales.
FEATURE Feature Set date and time formats passwords, keyboard locks, regulatory mode, and initial
consecutive number value, count function, and define softkeys.
SERIAL Serial Configures the communications ports
ETHERNET Ethernet Configures the Ethernet port
PFORMT Print Format Set print format used for header, gross, net, count, pallet and total ticket formats. See
Section 6.0 on page 51 for more information.
DIG IO Digital IO Assign digital input/output functions
VERS Version Display installed software version number. The Reset Config softkey on the Version menu can
be used to restore all configuration parameters to their default values.
Table 3-4. Setup Menu Summary
AUDIT CALIBR SETUP TEST DISPLAY ID
SCALES FEATURE SERIAL ETHERNET PFORMT DIGIO
VERS
CONFIG