User Manual Rev. E - Version 2.5 User guide

Configuration 27
3.7 Setup Menu
The setup menu allows:
• Configuration of scale, features, serial port, Ethernet, print format, and digi
tal inputs and outputs settings
• Viewing of the software and regulatory versions and reverting to default settings
.
ID DISPLAYTESTSETUPAUDIT CALIBR SETPTS
SCALES FEATURE SERIAL ETHERNET PFORMT
CONFIG
VERSDIGIOSETPTS
See
Figure 3-8
See
Figure 3-11
See
Figure 3-16
See
Figure 3-17
See
Figure 3-18
See
Figure 3-19
See
Figure 3-21
See
Figure 3-22
Figure 3-7. Setup Menu Layout
Table 3-6. Setup Menu Parameters
Menu Choices Menu Function
SCALES Configuration Configure and calibrate scales.
FEATURE Feature Set passwords, keyboard locks, regulator
y mode, and initial consecutive number value, count
function, and define softkeys.
SERIAL PORT 1
PORT 2
PORT 3 (Option
Card)
Configures the communications ports.
ETHERNET Ethernet Configures the Ethernet port.
PFORMT Print Format Set print format used for header, gross, net, count, pallet, setpoint and t
otal ticket formats.
See Section 6.0 on page 72 for more information.
SETPTS Setpoints Configure setpoints.
DIG IO Digital IO Assign digital input/output functions.
VERS Version Display installed software version and regulatory version numbers.
The Reset Config softkey on the V
ersion menu can be used to restore all configuration
parameters to their default values.