User Manual Rev. E - Version 2.5 User guide
24 Counterpart Counting Scale Indicator
3.4 ID Menu
The ID menu displays parameters for registers from 1 to 150. Sub-parameters are shown below.
VALUE VALUE VALUE VALUE
VALUE
QUANTITY
VALUE
CODE
VALUE
DESC
VALUE
PART NUM
LOT UNIT WT TARE UNITS LOCATION
REG 1 REG 2-150
SAME AS REG 1
G
OZ
OFF
KG
LB
ID DISPLAYTESTSETUPAUDIT CALIBR SETPTS
Figure 3-4. ID Menu Layout
Table 3-2.
ID Menu
Parameter Choices Description
REG 1, 2 -
150
QUANTITY
CODE
DESC
PA
RT NUM
LOT
UNIT WT
TARE
UNITS
LOCATION
Inventory quantity, range — 2000000000 to 200000000
ID code for part, maximum 32 alphanumer
ic
characters
Part description, maximum 32 alphanumeri
c characters
Part number, maximum 32 alphanumeric characters
Part lot number
, maximum 32 alphanumeric
characters
Unit weight, range 0.0 to 9999999.0
Tare weight, range 0.0 to 9999999.0
Weight units for both the unit weight value and the tar
e weight value, choices of
OFF, KG, G, LB, OZ
Part stock location, maximum 11 al
phanumeric characters
Table 3-3. ID Menu Parameters