User Manual Rev. D - Version 2.4 Instruction Manual

92 Counterpart Counting Scale Indicator
B2 Configuration =1 if even parity
B3 Dynamic =1 if MODE=NET
B4 Dynamic =1 if COZ
B5 Dynamic =1 if standstill
B6 Dynamic =1 if gross negative
B7 Dynamic =1 if out of range
B8 Dynamic =1 if secondary/tertiary
B9 Dynamic =1 if tare in system
B10 Dynamic =1 if tare is keyed
B11 Dynamic =00 if MODE = GROSS
=01 if MODE = NET
=10 if MODE = TARE
=11 (not used)
B12 Dynamic =00 if UNITS = PRIMARY
=01 if UNITS = SECONDARY
=10 if UNITS = TERTIARY
=11 (not used)
B13 Configuration =00 (not used)
=01 if current DSPDIV = 1
=10 if current DSPDIV = 2
=11 if current DSPDIV = 5
B14 Configuration =00 (not used)
=01 if primary DSPDIV = 1
=10 if primary DSPDIV = 2
=11 if primary DSPDIV = 5
B15 Configuration =00 (not used)
=01 if secondary DSPDIV = 1
=10 if secondary DSPDIV = 2
=11 if secondary DSPDIV = 5
B16 Configuration =00 (not used)
=01 if tertiary DSPDIV = 1
=10 if tertiary DSPDIV = 2
=11 if tertiary DSPDIV = 5
B17 Configuration =000 if current DECPNT = 8888800
=001 if current DECPNT = 8888880
=010 if current DECPNT = 8888888
=011 if current DECPNT = 888888.8
=100 if current DECPNT = 88888.88
=101 if current DECPNT = 8888.888
=110 if current DECPNT = 888.8888
=111 if current DECPNT = 88.88888
B18 Configuration =000 if primary DECPNT = 8888800
=001 if primary DECPNT = 8888880
=010 if primary DECPNT = 8888888
=011 if primary DECPNT = 888888.8
=100 if primary DECPNT = 88888.88
=101 if primary DECPNT = 8888.888
=110 if primary DECPNT = 888.8888
=111 if primary DECPNT = 88.88888
Format Identifier Defined By Description
Table 9-3. Custom Stream Formatting