User Manual Rev. D - Version 2.4 Instruction Manual

Print Formatting 79
7.0 Print Formatting
The Counterpart provides nine print formats, GFMT, NFMT, TOTALFMT, PALFMT, CFMT, ACCFMT, SPFMT, HDRFMT1,
and
HDRFMT2. These determine the format of the printed output when the PRINT key is pressed or when a KPRINT
EDP command is received. The HDRFMTs must be called from another format. The SPFMT (setpoint print format)
is printed from a setpoint routine.
Each print format can be custom
ized to include up to 500 characters of information, two header formats are limited
to 100 characters each), such as company names and addresses, on printed tickets. You can use the indicator front
panel (
PFORMT menu), EDP commands, or the Revolution
®
configuration utility to customize the print formats.
Note
Print formats are limited to 500 characters. The two header formats are limited to 100 characters
each
.
7.1 Print Formatting Commands
Table 7-1 on page 80 lists commands you can use to format the gross, net and count print formats. Commands
included in the format strings must be enclosed between < and > delimite
rs. Any characters outside of the
delimiters are printed as text on the ticket.