User Manual Rev. D - Version 2.4 Instruction Manual
Table 6-7. PFORMT Serial Commands
Command Description Values
GFMT.FMT Gross print format string See Section 7.0 on page 79 for information about demand print
format strings.
NFMT.FMT Net print format string
ACC.FMT Accumulator print format string
CFMT.FMT Count print format string
TOTAL.FMT Total print format string
SPFMT.FMT Setpoint print format string
HDRFMT1 Header 1 print format string
PALFMT.FMT Pallet print format string
HDRFMT2 Header 2 print format string
Table 6-8. DIG I/O Serial Commands
Command Description Values
DIO#b Digital I/O function OFF, ZERO, NT/GRS, TARE, UNITS, PRINT, CLEAR, CLRCN, GROSS,
DSPACC, SAMPLE, SFTKEY 1, SFTKEY 2, SFTKEY 3, SFTKEY 4, OUTPUT
Digital inputs and outputs are specified by bit number
Table 6-9. Print Format Port Serial Commands
Command Description Values
GFMT.PORT Set the transmit port for each of these formats PORT 1
PORT 2
PORT 3
NFMT.PORT
ACC.PORT
CFMT.PORT
TOTAL.PORT
PALFMT.PORT
SPFMT.PORT
Table 6-10. Keylock Serial Commands
Command Description Values
KEYLCK. NUMBER Keys can be locked or unlocked.
Default for all: Unlock
LOCK
UNLOCK
KEYLCK.PRINT
KEYLCK.TARE
KEYLCK.ZERO
KEYLCK.SAMPLE
KEYLCK.GROSSNET
KEYLCK.UNITWT
Serial Commands 77
Command Description Values
ETH.DEFAULTGATEWAY Sets IP address 0.0.0.0
ETH.DHCP DHCP ON, OFF
ETH.DNSPRIMARY DNS Primary 0.0.0.0
ETH.DNSSECONDARY DNS Secondary 0.0.0.0
ETH.IPADDRESS IP Address 192.168.0.1
ETH.LOCALHOSTNAME Local Host Name COUNTERPART
Table 6-11. Ethernet Serial Commands