User's Manual

4. Press SKIP+ or SKIP- to select the track starting with the selected letter (A- Z).
Search by Album name:
1. Press FIND/ESP twice in stop mode until ―ALBUM‖ and appears on the LCD display.
2. Press SKIP+ or SKIP- repeatedly to select an Album.
3. Hold the SKIP+ or SKIP- for 1-2 seconds to enter the selected Album,―ALBUM‖ will disappear on the LCD
display.
4. Press SKIP+ or SKIP- to select the track in the selected Album.
5. Press PLAY/PAUSE to play the selected track.
**If there are files in the root directory, the display will show ―Root‖. Hold SKIP+ or SKIP- for 1-2 seconds
until ―ALBUM‖ disappears from the LCD display. Then search the files in the root directory by pressing SKIP+
or SKIP- .
MP3 INFORMATION
1. If the MP3 file has track information stored on it, such as Artist and Title, the LCD will display that
information during MP3 CD playback.
2. Press and hold the FIND/ESP button over 1 second - MP3 information will show on the LCD.
NOTE: If the MP3 was recorded without any track information, ―UNKNOWN‖ or ―NONE‖ will be displayed
when the Find button is pressed.
ESP MODE
Shockproof function "ESP" can be set in CD mode only. Press the FIND/ESP button to switch the ESP function
on in CD mode and ―ESP‖ will appear on the LCD display. Press FIND/ESP again. "ESP" will disappear on the
LCD display.
USB OPERATION
1. Press the FUNCTION button until "USB" appears on the LCD display.
2. Connect the USB device (MP3 Player or USB Flash Memory Drive with stored music files) to the USB PORT.
Note: The unit can only play MP3 files up to 4GB max. and does not play WMA files.
3. Repeat Steps 5 to14 of MP3 CD OPERATION.
SD CARD OPERATION
1. Press the FUNCTION button until "CARD" appears on the LCD display.
2. Inster an SD Card with pre-recorded MP3 music (not supplied) into the card slot.
Note:The unit can only play MP3 files up to 4GB max. and does not play WMA files.
3. Repeat Steps 5 to14 of MP3 CD OPERATION.
USB SPECIFICATION
Interface
* USB2.0 Full speed, HOST (USB HUB is not supported)
Corresponding Flash Memory
* USB1.1 Flash memory
* USB2.0 High speed Flash memory
* Minimum memory size: 512MByte
* Maximum memory size: 4GByte
MP3 Decoder
* Compatible with MPEG Audio 1, 2, 2.5
* Compatible with Layer 1, 2, 3
* Compatible with Sampling rate: 8k, 16k, 32k, 11.025k, 22.05k, 44.1k, 12k, 24k,48kHz
* Compatible with Bit rate: 128k ~ 320kbps
* Subfolder nest: 8
* Number of track/titles Max 999
* Support ID3 tag V2.0
IMPORTANT NOTES
The USB connector does not support connection with a USB extension cable and is not designed for direct
communication with a Computer. It is not guaranteed that all USB memory devices & SD Card will work on this
audio system. Do not disconnect the USB device/SD Card during USB/CARD mode, as this may damage the
external device or its files. Please first switch to another Mode or power off before safely disconnecting the USB
device/SD Card.