Specifications

SIM900 AT Commands Set
SIM900_ATC_V1.01 64 23.06.2010
Parameters
<n> 0
Disable +CLIP notification
1 Enable +CLIP notificatio
<m> 0 CLIP not provisioned
1 CLIP provisioned
2 unknown
(e.g. no network, etc.)
Unsolicited result code
When the presentation of the CLI at the TE is enabled (and calling
subscriber allows), an unsolicited result code is returned after every RING
(or +CRING: <type>) at a mobile terminating call.
+CLIP: <number>,<type> [,<subaddr>,<satype>,<alphaId>,<CLI
validity>]
Parameters
<number> string type(string should be included in quotation marks)
phone number of calling address in format specified by
<type>
<type> type of address octet in integer format;
129 Unknown type(IDSN format number)
161 National number type(IDSN format)
145 International number type(ISDN format )
177 Network specific number(ISDN format)
<subaddr> string type(
subaddress of format specified by <satype>)
<satype> Integer type(type of subaddress)
<alphaId> string type(string should be included in quotation marks)
alphanumeric representation of <number> corresponding
to the entry found in phone book
<CLI validity> 0 CLI valid
1 CLI has been withheld by the originator
2 CLI is not available due to interworking problems
or limitations of originating network
Reference Note
3.2.19 AT+CLIR Calling Line Identification Restriction
AT+CLIR Calling Line Identification Restriction
Read Command
AT+CLIR?
Response
+CLIR: <n>, <m>
OK
If error is related to ME functionality:
+CME ERROR: <err>