Specifications

SIM900 AT Commands Set
SIM900_ATC_V1.01 185 23.06.2010
>,<timer>]
Parameters
<mode>
0 not set detect PDP
1 set detect PDP
<interval>
1<interval<=180(s)
<timer>
1<timer<=10
Reference Note
8.2.22 AT+CIPMODE Select TCPIP Application Mode
AT+CIPMODE Select TCPIP Application Mode
Test Command
AT+CIPMODE=
?
Response
+CIPMODE : (0-NORMAL MODE,1-TRANSPARENT MODE)
OK
Read Command
AT+CIPMODE?
Response
+CIPMODE: <mode>
OK
Parameter
See Write Command
Write Command
AT+CIPMODE=
<mode>
Response
OK
ERROR
Parameter
<mode> 0 normal mode
1 transparent mode
Reference Note
8.2.23AT+CIPCCFG Configure Transparent Transfer Mode
AT+CIPCCFG Configure Transparent Transfer Mode
Test Command
AT+CIPCCFG=
?
Response
+CIPCCFG: (NmRetry:3-8),(WaitTm:2-10),(SendSz:1-1460),(esc:0,1)
OK
Read Command
AT+CIPCCFG?
Response
+CIPCCFG: <NmRetry>,<WaitTm>,<SendSz>,<esc>