Specifications

SIM900 AT Commands Set
SIM900_ATC_V1.01 156 23.06.2010
Reference Note
7.2.2 AT+CGDCONT Define PDP Context
AT+CGDCONT Define PDP Context
Test Command
AT+CGDCONT
=?
Response
+CGDCONT: (range of supported <cid>s),<PDP_type>,,,(list of
supported<d_comp>s),(list of supported<h_comp>s)
[<CR><LF>+CGDCONT:
(range of supported <cid>s), <PDP_type>,,,(list ofsupported
<d_comp>s),(list of supported <h_comp>s) [...]]
OK
Parameters
See Write Command
Read Command
AT+CGDCONT
?
Response
+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<data_comp>,<head_comp>
[<CR><LF>+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<data_comp>,<head_comp>
[…]]
OK
Parameters
See Write Command
Write Command
AT+CGDCONT
=<cid>[,<PDP_ty
pe>,[APN>[,<PD
P_addr>[,<d_co
mp>[,<h_comp>]
]]]]
Response
OK
ERROR
Parameters
<cid> (PDP Context Identifier)
1 PDP Context Identifier 1
Definition stored in non-volatile memory
2 PDP Context Identifier 2
Definition stored in non-volatile memory
3 PDP Context Identifier 3
Default <cid>
Locked in non-volatile memory and is always defined, it can
not be changed by user.
<PDP_type> (Packet Data Protocol type)
IP Internet Protocol (IETF STD 5)
<APN> (Access Point Name) a string parameter(string should be
included in quotation marks) which is a logical name that is
used to select the GGSN or the external packet data