Specifications

SIM900 AT Commands Set
SIM900_ATC_V1.01 129 23.06.2010
6.2.8 AT+CDSCB Reset Cell Broadcast
AT+CDSCB Reset Cell Broadcast
Response
OK
Execution
Command
AT+CDSCB
Parameter
Reference Note
Please also refer to AT+CSCB.
6.2.9 AT+CMOD Configure Alternating Mode Calls
AT+CMOD Configure Alternating Mode Calls
Response
+CMOD: <mode>
OK
Read Command
AT+CMOD?
Parameter
Response
+CMOD: (0)
OK
Test Command
AT+CMOD =?
Parameter
Response
OK
ERROR
Write Command
AT+CMOD=[<m
ode>]
Parameter
<mode> 0 Only single mode is supported
Reference Note
6.2.10 AT+CFGRI Indicate RI When Using URC
AT+CFGRI Indicate RI When Using URC
Response
+CFGRI: <status>
OK
Read Command
AT+CFGRI?
Parameter
See Write Command