User manual

When purchasing the SIM Card, please ensure that you adhere to the RICA process.
When buying the SIM Card you need to request the service provider to activate the MMS
ability on the Card. You also need to ask the service provider to disable the need for a
PIN to be punched in when activating the SIM Card.
When installing the Spydercam, please ensure that the ―False Triggers‖ are kept to a
minimum, since there will be a charge from the cell phone company for every MMS sent.
Because the Spydercam works on GPRS technology ALWAYS ensure that you have cell
phone reception at the place where it is installed.
Getting Started
Powering On:
Once you have prepared the Spydercam by properly installing the SD Card, SIM Card
and batteries (or external DC) you can switch the Power on.
There are three basic operating modes:
OFF : Power is off.
Test : Menu Settings and Test Mode
ON : Live Mode
 In order to save battery power the Spydercam will automatically shut down after one
minute if no key is pressed while the device is in Test Mode.
 While in Test Mode the Red IR Light on the front of the device will remain on.
 When switching the Spydercam on, allow 5 seconds for stable start-up.
 In the Live Mode the LCD screen will be off and the green IR light on the front of
the device will flicker for 15 seconds.
Test Mode:
In this mode you will be able to do the following (See Figure 2) :
Press Menu key for Parameter settings
Press Up to capture Pictures manually
Press OK button for 5 seconds continuously for Playback of Picture.
Press Down to capture Video Clips manually
Press OK button to Stop Video recording. Then hold Stop for 5 seconds continuously for
Playback of video.