User manual

Service providers in various countries will require different settings. These settings will
be available on request from [e-mail]
21. SEND TO
Here the option is to choose as much as 4 cell phone numbers and/or 4 e-mail addresses
to receive the MMS/E-Mail messages. It is important to keep in mind that there is a
separate cost involved in each MMS/E-Mail,
22. FREQUENCY
In the Frequency Mode:
a) Press Up/Down to select 50/60 Hz.
b) Press OK to save the selection
c) Press Left to return to the previous screen without making a change to the
existing setting.
d) Press Menu to return to Test mode.
Mounting the Spydercam
There are various options to mount the Spydercam:
 Using the strap supplied with the device.
 Using a steel cable lock – recommended.
 Using a lockable steel box
Points to remember when setting up:
 When the Spydercam is attached to a tree, please ensure that the diameter is at least
15 cm.
 To achieve optimal results the Spydercam should be 3-6 meters away from the object
and at a height of 1,5 to 2 meters.
 When used as a security device try to ensure that possible movement will be captured
from straight ahead.
 The Spydercam should be angled at a 70-80º relative to the ground for optimal use.
 Do not enter within the monitored area once the Spydercam has been set up since it
would capture/send an image/video.
 Ensure that there are not any moving objects (such as grass/leaves) within a three
meter radius in from of the Spydercam.
 The PIR is sensitive to temperature variances. The PIR is only effective up to 15
meters, while this distance reduces to 6 meters when the temperature exceeds 32ºC.