User manual

9. VIDEO FRAMES
In the Video Frames mode:
a) Press Up/Down to select 30/15 frames per second.
b) Press OK to save the selection
c) Press Left to return to the previous screen without making a change to the
existing setting.
d) Press Menu to return to Test mode.
10. TIME STAMP
This functionality determines whether the date/time should be stamped onto the pictures
and video clips. It is important to note that it is required when the photos/videos are to be
used as evidence with SAPS.
In the Time Stamp mode:
a) Press Up/Down to select ON/OFF.
b) Press OK to save the selection
c) Press Left to return to the previous screen without making a change to the
existing setting.
d) Press Menu to return to Test mode.
11. SET CLOCK
In the Set Clock mode:
a) Press Up/Down to select Month/Day/Year – Hour/Minutes.
b) Press OK to save the selection
c) Press Left to return to the previous screen without making a change to the
existing setting.
d) Press Menu to return to Test mode.
12. SENSOR LEVEL
This category determines the sensitivity of the PIR. The higher the setting, the more
sensitive the device would be to activation. The High setting should ideally be used
indoors only, while low sensitivity should be used outdoors. It is important to note that
the sensitivity of the PIR is related to temperature – the higher the temperature, the lower
the sensitivity.