Installation guide

7
To Set Up Recording Rates
• Right click to open the menu and select “MAIN MENU”.
• Select “SETTING”
• Select “ENCODE”
We recommend:
That each camera be set to H.264 with a maximum of 1280x720 resolution, 15fps, Bit Rate: VBR with
Quality set to 5. While any of the cameras may be set higher, please be aware that it will reduce the
total recording time to less than 2 weeks.
You may also set individual encoding options for Regular, Motion Detect and Alarm Recording
To Begin Recording
Once you have successfully set the Date and Time, exit the Menu by right clicking or pressing the ESC
button. By default, the NVR will begin recording when it is properly connected to the cameras and has an
installed HDD. If it is recording, the recording icon “
” will be displayed on screen.
Overwriting View:
When the system is in Overwrite recording mode, the oldest recorded data will be
overwritten automatically. This NVR System is set to Overwrite by factory default.
You may set this option in the “GENERAL” Menu.
Record Times:
The NVR4PROPACK system is capable of storing 2 weeks of recorded footage based on 1Tb of
storage and the 4 included 1.3MP Cameras set to 720P @ 15fps and VBR @ Quality 5.