Installation guide

23
How to wire an Electric Door Strike to the Door Station
Most Electric Door Strikes will unlock when powered and lock when they are without power. This means
the negative from 12v Power Supply output can simply be looped through the Door station and
connected to the Electric Door Strike. The power supply’s positive output would then connect directly to
the electric lock.
When connecting the Door Station to an Electric Door Strike:
- The Electric Door Strike positive (+) is connected to the 12vDc Power supply positive (+).
- The Electric Door Strike negative (-) is connected Door Stations COM terminal.
- The 12vDc Power supply negative (-) is connected to the Door Stations NO terminal.
When connecting the Door Station to the optional Unlock Button:
- Make sure the passive unlock button connects to Door Station ALM 2 and GND.