Installation guide

18
How to change the Door Station IP Address
Method 1 - Using the included ConfigTool
Before starting you must first have a copy of the “Config Tools” which can be found on the included
software disc or downloaded from here:
http://downloads.rhinoco.com.au/dvr/VSIP1MPFBIR_VSIP1MPDIR_Scan_Tool.zip
1. Double click the “ConfigTools.exe” icon to open the scan tool. It will automatically scan your network
to find the new Door Station, and then in the device list you will see IP address, port number, subnet
mask, gateway, and the unique MAC address information.
2. Select the Door Station from the list as it should be the default address 10.22.5.189
(if necessary match up the unique MAC address with the MAC Address on the devices’ sticker).
3. Click LOGIN, and then LOGIN again to log in to the camera and modify the IP address to your
4. Here you can change the IP address to one that is more compatible with your network, as well the
corresponding gateway and subnet mask. For Example 10.22.5.190. Then Click ok to save.
5. You have now successfully set the Door Station to a new IP Address and can now set up additional
Door Stations if necessary.