Installation guide

11
9. Choose NETWORK and you will see the settings for the Primary Door Station. Here you can
change the name of the device, check the IP Address is set to 10.22.5.189 and ensure its Enable
Status is set to ON.
10. Press the Next Arrow “ > ” and you will see the settings for the secondary Door Station. Enter a
name for your secondary door station, the IP Address and set Enable Status to ON. e.g.
Name: Sub VTO
Device: Unit Door Station
IP: 10.22.5.190
Enable Status: ON
11. You have now successfully set up your VIPvision Intercom System.