Specifications

This assures that the firmware file will be updated the next time the Rhino module is loaded, which
normally happens when the PC boots. You can manually force this event using:
rmmod rcbfx
modprobe rcbfx
or to force the uploading of the any version of firmware to the rcbfx analog card, which is the last version
that was “installed” using the install command:
rmmod rcbfx
insmod /lib/modules/`uname -r`/extra/rcbfx.ko force_fw=1
You can use
dmesg | grep rcbfx
to view the status of the module loading, and to validate the hardware, firmware and DSP version installed
as well once the module has loaded.
Rhino Equipment Corp. • 8240 S. Kyrene Rd. • Suite 107 • Tempe, AZ 85284 • [phone]
25