Specifications

For R2T1, and R4T1 type:
modprobe rxt1
16. Move on to configuring the zaptel interface. For more information on span and channel configuration
please refer to sections 3.d & 3.e. For configuration examples for Rhino analog PCI cards please refer
to section 4.c
For TrixBox Specific Installations:
1. Boot the PC and log in as “root” or other user that has appropriate software build
privileges.
2. Install the Rhino RPM's:
yum -y install rhino-`uname -r`
press ENTER
3. reboot
Note: genzaptelconf ONLY works in Trixbox 2.2 and later.
4. Type the following for analog cards:
genzaptelconf
For Digital Cards please skip to configuring zaptel.conf and zapata.conf
Rhino Equipment Corp. • 8240 S. Kyrene Rd. • Suite 107 • Tempe, AZ 85284 • [phone]
18