Specifications

2. INSTALLATION
2.a Site Selection
The selected installation site should provide a stable operating environment. The area around the
installation site should be clean and free from extremes of temperature, humidity, shock, and vibration. The
operating temperature should be kept below 100 degrees F (38° C).
The Rhino OST PCI card is designed to be used on T1/DS1/ISDN-PRI/E1 services for a T1 card, or to be
connected to the PSTN when using and analog card. Connecting it to any other type of telecommunications
service or services will void the warranty and could cause damage to the network of the provider of the
non-approved service or services.
All wiring done external to the Rhino OST PCI card should follow the guidelines as set forth by the
National Electrical Code. See section 1.b and 3.a.
2.b Unpacking the Rhino PCI Card
The unit comes tested and sealed in an anti-static custom shipping box. The package contains the Rhino
OST PCI card Users Manual, and a Rhino Products CD containing the most recent drivers and
documentation.
Before removing the card from its packaging, ensure that you are grounded.
To ground yourself please use an Anti-Static wrist band.
Inspect the Rhino OST PCI card for any signs of physical damage. Report any damages to the shipper.
Keep all packaging material in the event that you need to move or ship the unit. Warranty returns must be
shipped back to Rhino Equipment Corp in the original shipping box.
Rhino Equipment Corp. • 8240 S. Kyrene Rd. • Suite 107 • Tempe, AZ 85284 • [phone]
11