User guide

Digium TE120P, TE210P, TE220P, TE410P, TE420P

The Digium TE120P, TE210P, TE220P, TE410P, or TE420P are internal PCI cards

that oﬀer one, two, two, four, or four T-1 digital interfaces respectively (the 120,

220, and 420 are newer versions of the 110, 210, and 410). Follow the steps above in

the section “PCI card physical installation” if your PCI card is not already

physically installed in your Evolution server. Log in to the web interface and

conﬁgure the card using the same information provided for the Digium TE110P but

select T1/PRI-TE120P, T1/PRI-TE210P, T1/PRI-TE220P, T1/PRI-TE410P, or T1/

PRI-TE420P rather than T1/PRI-TE110P. Otherwise the settings are the similar.

Conference Rooms

Conference rooms allow multiple internal and/or external callers to talk together on

the same bridged call. Once conﬁgured conference rooms may be accessed through

an auto attendant (under Call Routing > Auto Attendant, edit your auto attendant,

set Send Calls To equal to Auto Attendant, and then set Location equal to

ConferenceAdmin), dialing the feature code *10, or by sending incoming calls

directly to the conference system (under Resources > Phone Lines, edit your

Provider, set Send Calls To equal to Auto Attendant, and then set Location equal to

ConferenceAdmin). You can also access a conference room by dialing the

conference room number (for example 14001).

Setting up a new conference:

1. Log on to Evolution and click on the Resources tab and then on the

Conference Rooms menu item.

2. Click New Record at the bottom of the screen. The detail section will expand

and allow you to conﬁgure the new conference room.

3. Select an available number from the Conference Room drop-down menu. This

number will be used to reference the speciﬁc conference room.

4. Enter a description to help you remember the purpose of this conference room.

5. Enter an access code. This is the password that callers will enter to gain access

to this conference room.

6. Enter an admin code. This is the password that the conference room owner or

administrator will use to control the conference room during the call.

7. Select yes or no to enable or disable this conference room. You may want to

disable conference rooms that are not used frequently and enable them in time

for the conference call. This prevents unauthorized use of the conference room.

8. Secure Conference - if set to No then you will be required to enter the

conference room number and the access code when you dial *10 but you will

automatically have access if you dial the conference room directly (for example

14001). If set to Yes then you will be required to enter the conference room

number and the access code when you dial *10 and you will have to enter the

access code (pin) but not the conference room number if you dial the

conference room directly (14001).