User guide

a) connect an analog telephone to one of the ports labeled PHONE1 or

PHONE2

b) Dial **** (star key four times)

c) Dial 73738# and the PAP2T-NA will be reset

• You may continue using your PAP2T-NA with DHCP or you may assign a

static IP address. Click on the System tab and modify the settings per your

network. Following is a screen shot that shows the default settings:

• Click on the Line 1 tab to conﬁgure the SIP settings. The minimum

information required for registration with Evolution PBX is as follows:

‣

Line Enable: Yes

‣

SIP Port: 5060

‣

Proxy: Evolution’s IP address (for example 192.168.165.100)

‣

User ID: extension number (for example 1020)

‣

Password: password provided by Evolution (see step 6 above)

‣

Use Auth ID: No

• Click the Save Settings Button. The PAP2T-NA will register automatically

with Evolution. Connect an analog phone to line one and make a call.

Generic Telephone Settings