User guide

Record Calls
Yes will record calls made directly to this extension, No will not record calls for
this extension.
MAC Address
12 character MAC address of the telephone configured with this extension.
Mailbox
Personal creates a voicemail account with the same number as this extension.
Selecting a number will assign that voicemail account to be this extension’s
voicemail account.
Time Zone
The time zone of the telephone (Hawaii, Alaska, Pacific, Arizona, Mountain,
Indiana, Central, Eastern, Atlantic). Auto configured telephones will use this
setting to automatically calculate the correct time and date.
Paging
Enabled will include this extension in the permission to be paged. Disabled will
prevent this extension from being paged.
Remote Phone
Yes configures Evolution and telephone auto configurations for remote use (a
telephone at a different location). No configures Evolution and telephone auto
configuration files for local use (default).
IP Address
For Future Use
Heartbeat
Advanced. The duration for keep-alive messages between Evolution and the
telephone (options = No, 1000, 2000, 3000, 4000, 5000).
Outbound
Internal Only permits this extension to only make internal calls (extension to
extension), Internal-Local permits this extension to make internal and local calls
(per the Outbound Dial Map route Local), Internal-Local-Toll permits this
extension to make any type of call that Evolution is configured to allow (default).
Codec
Set the CODEC to use for this extension (G711 (USA), G729 (Licensed**)). **
requires the purchase of a license, contact Intuitive Voice.
Configuration of X-Lite version 3.0 for Evolution
CounterPath X-Lite version 3.0 for Windows may be configured for Evolution as
follows:
1. Open X-Lite and click on the Menu button and select Sip Account
Settings... A new window will open called SIP
Accounts.
2. Click on the Add... button. Another new
window will open called Properties of Account.
3. In the User name field enter the extension
number that you are configuring. This number
will be listed as the Username on the popup
window called Generic Device Settings that Evolution provides after you click
the Save button when configuring a SIP-Generic-Device.
4. Enter the password in the Password field.
5. Enter the IP address of your Evolution server in the Domain field. This IP
address is also listed on the Evolution popup window as the SIP Address, Proxy
Address, and Outbound Address.
6. Check the checkbox for Register with domain and receive incoming calls.
7. Set Send outbound via: to domain.
13