User guide
Page 8 of 57
ConfiguringYourPBX
The first time that you attempt to log in to Evolution PBX from a Web browser, the
Installation Wizard guides you through the process of installing your license key and
configuring your PBX.
SettingUptheLicense
To Configure the First Run Wizard
1. Open a Web browser on a computer other than the Evolution PBX server but is
connected to the same network.
2. In the Address bar, enter http://X.X.X.X/home/admin.php (where X.X.X.X is the
IP Address that you wrote down at the end of the installation process).
The License Key window displays.
3. In the License Key window, enter your license key, click Forward and the
Network Settings window displays.
4. In the Network Settings window, modify the Default Gateway, Primary DNS, IP
Address (static), Subnet Mask, and Secondary DNS as required.
Note: When Evolution PBX is first installed it acquires its network information
from your network via DHCP.