User guide

Page 53 of 57
If the server reboots without human interaction the server may not
complete the boot up process preventing the PBX from functioning.
Disabled turns off the nightly reboot to avoid unattended reboots.
Email Type Direct or SMTP. If Direct then Evolution PBX will send Email directly to the
Email server for each Email Address. For example, if Evolution PBX is to
send an Email to [e-mail] then Evolution PBX will attempt to
send the Email to the domain.com Email server. If SMTP then Evolution
PBX will use the SMTP server information that is specified in the following
settings (SMPT Server, Username, and Password) for all outbound Email.
SMTP Server The server name or IP Address of your SMTP server.
SMTP Username The username of the SMTP account on your SMTP server (if required).
SMTP Password The password of the SMTP account on your SMTP server (if required).
Fax Email/Extension Specify the extension or Email Address to send inbound faxes when they
are automatically detected.
Note: Requires the fax to Email upgrade option.
SystemStatus
System Status displays a variety of system information about your pbx including:
System Vital, Network Usage, Hardware Information, Memory Usage and Mounted File
Systems.
Note: This system information is pulled from your system. These fields cannot be
configured and are used exclusively for display purposes.
RealtimeMonitoring
Realtime monitoring
To Create a New Monitor
1. Login to Evolution PBX, click the Administration tab then click Realtime
Monitoring.
2. Click New Record and the configuration window displays.
3. In the Dial Code field, enter the code that will be dialed to begin monitoring.
4. In the Comment field, enter the
5. In the Start Date (MM/DD/YYYY) field, enter the date to begin monitoring.
6. In the End Date (MM/DD/YYYY) field, enter the date to end monitoring.
7. In the Extension field, select Extension to select a specific extension or
Extension Group to select an extension group.
8. In the Number field, select an extension or extension group to monitor.
9. Click Save to save your changes.
