User guide

Page 5 of 57
InstallingEvolutionPBX(v3.0)
Evolution PBX is typically shipped pre-installed on servers that are purchased from
Intuitive Voice Technology
. A CD-ROM may be downloaded or shipped for trial or for
purchase. Contact [e-mail]
for more information.
To Install Evolution PBX from the Evolution PBX installation CD
1. Verify that your computer BIOS is setup to boot first to the CD or DVD drive that
you will be installing from. Refer to your computer or motherboard
documentation for information about setting your computers boot order. The
image below illustrates what a BIOS setup screen might look like on your
computer.
2. Insert the Evolution PBX CD and restart your computer.
Your server reboots and the CD begins the process of installing the Evolution PBX
software.
Note: This process will erase the entire contents of your hard drive and create a
dedicated PBX appliance.
3. Press Enter when the Intuitive Voice Technology logo displays and the
installation process begins copying the operating system and Evolution PBX files
and programs to your computer.
Note: The computer will reboot twice during the installation process.
4. Remove the Evolution PBX installation CD before or shortly after the reboot to
prevent the installation process from restarting.