User guide

Page 38 of 57
DigiumTE120P,TE210P,TE220P,TE410PandTE420P
The Digium TE120P, TE210P, TE220P, TE410P, or TE420P are internal PCI cards that
offer one, two, two, four, or four T-1 digital interfaces respectively (the 220 and 420 are
newer versions of the 210 and 410 and the 210 is a newer version of the 110).
To Configure Digium TE120P, TE210P, TE220P, TE410P and TE420P
1. Follow the steps in the Installing Digital T-1 PCI Cards
section if your PCI card is
not already physically installed in your Evolution PBX server.
2. Login to the Web interface and configure the card using the same information
provided for the Digium TE110P
but select T1/PRI-TE120P, T1/PRI-TE210P,
T1/PRI-TE220P, T1/PRI-TE410P, or T1/ PRI-TE420P rather than T1/PRI-TE110P in
step 3.
ConferenceRooms
Conference rooms allow multiple internal and/or external callers to talk together on the
same bridged call. Once configured, conference rooms may be accessed through an auto
attendant, dialing the feature code *10 or by sending incoming calls directly to the
conference room (dialing the conference room, for example, dialing 14001).
To Set Up a New Conference
1. Login to Evolution PBX, click the Resources tab then click Conference Rooms.
2. Click New Record and conference room configuration window displays.
3. In the Conference Room field, select an available number. This number will be
used to reference the specific conference room.
4. In the Access Code field, enter the password that callers will enter to gain
access to this conference room.
5. In the Admin Code field, enter an admin code. This is the password that the
conference room owner or administrator will use to control the conference room
during the call.
6. In the Description field, enter a description to help you remember the purpose
of this conference room.
7. In the Disable field, select Yes to enable or No to disable this conference room.
You may want to disable conference rooms that are not used frequently and
enable them in time for the conference call. This prevents unauthorized use of
the conference room.
8. In the Secure Conference field, select No and you will be required to enter the
conference room number and the access code when you dial *10 but you will
automatically have access if you dial the conference room directly (for example
14001). Select Yes then you will be required to enter the conference room
number and the access code when you dial *10 and you will have to enter the
access code (pin) but not the conference room number if you dial the conference
room directly (14001).
To Configure the Auto Attendant to Access Conference Rooms
1. Login to Evolution PBX, click the Call Routing tab then click Auto Attendant.
2. Select a conference room to edit or set up a new conference room.
3. In the Send Calls field, select Auto Attendant.
4. In the Location field, select ConferenceAdmin.